AUTOMATIC SHOTBLASTING MACHINE LAMI H - Marcovil
17070
page-template,page-template-full_width,page-template-full_width-php,page,page-id-17070,ajax_fade,page_not_loaded,,qode-title-hidden,qode-theme-ver-10.1.1,wpb-js-composer js-comp-ver-4.11.2.1,vc_responsive

AUTOMATIC SHOTBLASTING MACHINE

MODEL LAMI H | HORIZONTAL ROLL TABLE 

STRIPPING PROCESS: CONTINUOUS

The LAMI H model, with horizontal roller table to enter and extract the parts, is the ideal solution for stripping profiles, structures and plates.

The parts to be stripped are placed on the roller table with variable speed, which continuously transports them to the projection chamber where a set of electrically driven and properly positioned centrifugal turbines project at a speed of 3.000 rpm a mixture of spherical and angular steel grit against the parts, guaranteeing an uniform stripping pattern throughout the piece to grade SA 2,5.

After the projection chamber, the stripped parts enter a cleaning chamber in which a linearly positioned rotary brush and high pressure blowers remove the powder and some of the grit deposited on the parts.

All the dust resulting from the stripping process is extracted by a fan into a filter cabinet.

The automatic stripping process takes place in a closed circuit. The projected grit is collected with a screw conveyor, installed at the bottom of the machine, up to the elevator bucket that transports i tinto the recuperator, mounted over the machine and distributes it within the projection turbines.

Depending on the size of the parts to be stripped, the projection chamber, the number of turbines and other elements are defined. Contact us to know more.

STANDARD CONFIGURATION:

Projection chamber built and coated with anti-wear material

Turbines of high performance and endurance for grit projection with capacity of 7,5 kW to 22 kW, depending on the model

Cleaning chamber composed of rotary brush with linear adjustment and high pressure blowers

Bucket elevator

Recuperator with respective grit distribution valves with pneumatic adjustment

Dust extraction by fan into filter cabinet with automatic sequencer cleaning of filter cartridges.

System of recovery and treatment of grit, maintaining a suitable particle size, eliminating thin and impurities

Horizontal roller table for feeding and extracting parts with adjustable speed, and the rollers in the projection chamber have anti-wear protections and protection mazes of the berings that support the rollers.

Variable speed during the entrance of the parts, allowing different work patterns